You need an account to access this content
Create a free account and get access to all downloads and more!
Hybrid Microgrid Controllers (Advanced training)
Face-to-face course
Hybrid Microgrid Controllers (Advanced training)
Location: Prague 7, U Uranie 1612/14a, 17000, Czech Republic
Training fee: 990 EUR per person
Capacity: 12 participants
Transitioning to more sustainable energy sources is at the top of the power generation and energy management agenda. Our specialized training course is designed to help you gain a comprehensive understanding of hybrid microgrids and ComAp's advanced control systems that can simplify their operation, control and monitoring.
At the start of the hands-on training, participants receive a real-life project with clearly defined specifications. Throughout the course, they will work on the project together and, once it is complete, test the final solution thoroughly and commission it.
We strongly recommend completing either our Single & Paralleling Gen-set Controllers training or Hybrid Microgrid Controllers (Basic training). Alternatively having prior experience with ComAp products before enrolling in this course is necessary. The knowledge covered in either of these courses is crucial for understanding the content of this advanced course.
After successfully completing this training course, participants will receive a ComAp certificate of completion. Certificates are issued at all ComAp training locations worldwide, and we ensure the same standard of knowledge and expertise everywhere.
Location: Prague 7, U Uranie 1612/14a, 17000, Czech Republic
Training fee: 990 EUR per person
Capacity: 12 participants
Transitioning to more sustainable energy sources is at the top of the power generation and energy management agenda. Our specialized training course is designed to help you gain a comprehensive understanding of hybrid microgrids and ComAp's advanced control systems that can simplify their operation, control and monitoring.
At the start of the hands-on training, participants receive a real-life project with clearly defined specifications. Throughout the course, they will work on the project together and, once it is complete, test the final solution thoroughly and commission it.
We strongly recommend completing either our Single & Paralleling Gen-set Controllers training or Hybrid Microgrid Controllers (Basic training). Alternatively having prior experience with ComAp products before enrolling in this course is necessary. The knowledge covered in either of these courses is crucial for understanding the content of this advanced course.
After successfully completing this training course, participants will receive a ComAp certificate of completion. Certificates are issued at all ComAp training locations worldwide, and we ensure the same standard of knowledge and expertise everywhere.
Agenda
The hands-on training takes place at our modern training facility at ComAp headquarters (U Uranie 1612/14a, Prague 7 - Holešovice)
DAY 1
DAY 2
DAY 3
DAY 1
| 09:00 – 12:00 |
Hybrid microgrid overview & project introduction Introduction to hybrid microgrids, products and applications. InteliNeo 5500/6000 functions (state of charge (SOC) management, power control, curtailment, etc.). Real-world hybrid microgrid sites using InteliNeo Reviewing the project specifications, SLD and requirements. Project design: group workshops (brainstorming on configuration and controller selection) |
| 12:00 – 12:45 | Lunch break |
| 12:45 – 16:00 |
Project configuration Brief commissioning of InteliMains and InteliGen controllers. Introduction to load sharing with InteliMains and shared signals. Starter Kit hands-on exercises |
DAY 2
| 09:00 – 12:15 |
BESS commissioning I Commissioning of BESS: start/stop, P/Q values, power control, Modbus mapping. Group workshops for brainstorming and practical tasks. |
| 12:15 – 13:00 | Lunch break |
| 13:00 – 16:30 |
BESS commissioning II Continuatioin of previous session: BESS power control: U-f (grid forming) and P/Q (grid following) modes; VSG (Virtual Synchronous Generator); control of voltage and frequency; regulation settings |
DAY 3
| 09:00 – 12:15 |
PV commissioning I Commissioning of PV: reading PV values, curtailment output and Modbus mapping. |
| 12:15 – 13:00 | Lunch break |
| 13:00 – 16:30 |
PV commissioning II & final project testing and feedback Continuatioin of previous session. Test scenarios based on the project requirements |